The transformation of mechanical manufacturing technology will promote the development of film blowing machine, plastic industry for a long time, the plastics industry is dependent on foreign advanced machinery and equipment, the introduction of foreign technology, will improve the plastic industry and plastic industry production cost, mode of development not only improves the performance of intelligent plastic film blowing machine, can reduce cost, reduce working time will be significantly to improve the plastic industry status quo. Intelligent manufacturing equipment refers to mechanical equipment with intelligent system, have on the outside perception, analysis, decision-making and control function, application of the intelligent mode, the blowing machine equipped with sensing, temperature sensing coefficient, can effectively improve the efficiency of automatic operation, and blow film machine can prevent the detection function.

Film blowing machine production process is firstly added polyethylene particles drying hopper, then particles by their own weight from the hopper into the screw thread, when the screw and the oblique edge contact, the rotation of the face of the plastic face aslant vertical thrust and aslant, the particle goes forward. Because of the friction between the plastic and the screw and the plastic and the cylinder, the collision and friction between the particles and the outer heating of the cylinder are also due to the plastic melt. The molten plastic head by filtration after removing impurities from the mold, after cooling, blowing the finished film roll.

Electromagnetic heating (IH) technology is a new high-frequency heating technology, research and development of scientific research personnel, the production of energy saving and environmental protection high frequency heating system, heating efficiency increased to 90% (maximum 99.8%). According to the various plastic processing enterprises in the installation of testing, energy saving and environmental protection high frequency heating system for plastic processing enterprises, energy saving effect is very obvious, saving up to 30%-70%. Fully reflects its energy saving advantages, for plastic processing enterprises to save a lot of electricity costs, improve production efficiency, improve the environment of the workshop, so as to directly reduce the cost of indirect production. Bagging machine red machine forging forging robot robot winding film machine Mick